Thinners

Designed to reduce or thin MONOTHANE, DUOTHANE, & TIMBERSEAL.

USES:

Urethane Coatings THINNERS may be used to reduce MONOTHANE HS – 50 GLOSS, MONOTHANE 45 GLOSS, MONOTHANE 44 GLOSS, MONOTHANE SEMI GLOSS, MONOTHANE SATIN, MONOTHANE MATT, DUOTHANE PART A, DUOTHANE PART B and TIMBERSEAL.

Some timber species, (notably Brush Box, Black Butt, Spotted Gum, Tallowwood ) secrete oils and waxes which condense on the timber surface. To remove these natural contaminants dampen a clean rag with Urethane Coatings THINNERS or CLEANING SOLVENT and wipe over the floor. Every 4-6 m² rinse the rag (or replace with a clean rag) in clean THINNERS or CLEANING SOLVENT, thereby removing surface contaminants rather than further smearing contaminants over the floor.

SHELF LIFE:

This product is best if used within 24 months from manufacture (refer to batch number), when stored in unopened containers under normal conditions of temperature and humidity.

SAFETY DIRECTIONS:

Usage of this material must be under well ventilated conditions to minimise inhalation of vapours. Wear respirator with filters that conform with AS1716.

WARNING FLAMMABLE:

Contains 780gms per litre of Aromatic Hydrocarbons. This drum contains volatile and flammable solvents and when using contents adequate ventilation to the outside must be provided. All potential sources of ignition (open flames, pilot lights, furnaces, spark producing electrical switches, etc.) must be eliminated in or near the working area. DO NOT SMOKE. Keep drum closed with not in use.

FIRST AID:

If affected by inhalation of vapour, remove to fresh air. If breathing difficulty persists or occurs later, consult a doctor and have label ready. If swallowed, do NOT induce vomiting. Give water or milk. CONTACT DOCTOR OR POISONS INFORMATION CENTRE Australia 131126. In case of eye contact, flush immediately with water for fifteen minutes and call a doctor. In case of skin contact, remove contaminated clothing and wash skin and clothing with soap and water.

Visit link below for additional SDS Info: